Installation Guide
Step-by-step guide to installing LED strip
Required Tools
- Scissors
- Measuring Tape
- Pencil
- Cleaning Supplies
1. Surface Preparation
Thoroughly clean the ceiling surface from dust and dirt. Degrease the areas where the strip will be mounted using an alcohol solution.
Helpful Tips
- Use a lint-free cloth
- Let the surface dry completely before installation
Important Notes
- Do not use aggressive cleaning agents
2. Marking and Planning
Mark the ceiling, indicating the strip mounting locations and power supply position. Consider the distance to power outlets.
Helpful Tips
- Use a pencil for marking
- Consider furniture placement and main lighting zones
3. Strip Installation
Gradually remove the protective layer and stick the strip following the markings. Press the strip evenly, avoiding bubbles.
Helpful Tips
- Do not stretch the strip during installation
- Work in 30-50 cm sections
Important Notes
- Do not bend the strip at sharp angles
- Avoid touching the LEDs with your hands